
Wavlink AC1200 wifi extender setup
- Tech
- March 14, 2023
- No Comment
- 64
You are able to increase the range of your current wireless network wherever you are with the Wavlink AC1200 wireless range extender. For the purpose of improving and increasing the reliability of your current network, four antennas are arranged in a special and patented omnidirectional arrangement. You can gradually grow your wireless network with the AC1200 dual-band range extension. Its extremely compact size and practical design make deployment simple. Furthermore, because of its sleek design, it blends in seamlessly with the interior design of your house or workplace. The high-performance antennas enable you to connect all of your gadgets from anywhere in your home. Furthermore, your router and the Wavlink AC1200 wifi extender setup can interact wirelessly.As a consequence, it starts boosting the signals from your router right away.
Wavlink AC1200 extender setup via manual method?
Use the methods listed below to install the Wavlink AC1200 using the WPS method:
- Connect a power source to the Wavlink AC1200.
- Watch for the extension to come on by lighting the solid blue light.
- Now, keep down the WPS button on the extender.
- To finish the setup process, press the WPS button on the wireless router or modem.
- The AC1200 should not be unplugged while the extender’s LED is flashing.
- The Wavlink AC1200 WPS setup is now finished.
- The WIFI repeater’s power, client, device, and WPS LEDs all turn solid green.
- Wherever the weak messages are, install the Wavlink extender. Make sure your WIFI access is sufficient.
Note:- If you need any help regarding you wavlink wifi extender so contact our technician or visit the official website that is ap.setup.
How can I install the wavlink ac1200 extender?
Follow these steps to attach the Wavlink AC1200 extender using a web browser:
- A power source should be connected to your AC1200 Range Extender.
- Your application must now be in repeating mode.
- Go to the WIFI settings choices on your tablet or laptop.
- then look for the Wavlink-N network and join it.
- After establishing a connection to the extender network, launch any online browser, such as Google Chrome, Mozilla Firefox, or Microsoft Edge.
- Enter 192.168.10.1 or wifi.wavlink.com in the IP field.
- The Wavlink AC1200 setup screen is visible.
- As directed on the screen, link your extender to your home network.
How do I reset the Wavlink AC1200 extender?
- To reset the Wavlink AC1200, first connect it into an electrical outlet.
- Once the extender’s power led light is switched on.
- Look for a toothpick or a paperclip.
- Push and press the reset button for a further 10 to 15 seconds before releasing it.
- You must now wait until the power led’s light turns solid green after it turns yellow.
- The extension has now been properly reset to its factory default values.
- To reinstall the WiFi extender, follow the Wavlink AC1200 setup instructions.
How do I configure my Wavlink AC1200 via wavlink.com?
- To start installing, connect the AC1200 WIFI extender to an electrical receptacle.
- Check that repeater mode is selected on the extension icon.
- Once the extender’s power led light is switched on.
- Connect to the Wavlink network by going to the WIFI settings option on any wifi device.
- Open any web browser after connecting, then type wifi.wavlink.com into the address field.
- You have reached the setup page for the Wavlink AC1200 extender.
- Follow the on-screen steps to connect your Wavlink WIFI AC1200 Dual-band extender to your home wifi network or modem.