Top Benefits of Solar Panel Detailing

Top Benefits of Solar Panel Detailing

It is a sure bet that Solar Panel Detailing is one of the most cost-effective ways to power a home or business through sustainable energy. Among the fastest-growing sources of electric power in the world today, solar energy is one of the newest and most efficient companies, and it can be safely installed on rooftops, parking lots, side yards, and many other places. The following are some of the benefits that can be derived from installing solar panels: 

The Solar Panel Detailing: What Is It?

The sun is the source of solar power. The solar panel (also known as a PV panel) converts photons, which are energy particles from the sun, into electricity so that it can be used in electrical loads.

In addition to remote power systems, telecommunications equipment, remote sensing, and of course residential and commercial solar electric systems for producing electricity, solar panels can be used for just about anything.

Solar Panel Detailing Types

Monocrystalline panels, polycrystalline panels, PERC panels, and thin-film panels are the four main types of solar panels today.

Aerial view of a private house with solar panels on the roof

Solar panels with monocrystalline crystals

This is also called a single-crystal panel because it is made from several wafers of pure silicon crystal. It’s easy to identify them by their dark black color since they’re made from silicon. In addition to being the most space-efficient and longest-lasting solar panels, monocrystalline panels are made of pure silicon. But it’s not cheap – silicon is wasted in every monocrystalline cell, sometimes as much as 50%. It was expensive because of this.

Solar panels with polycrystalline crystals

Rather than being made from just one silicon crystal, these are made from several. Molds are made by melting silicon fragments and pouring them in. Compared to monocrystalline cells, polycrystalline cells are much more affordable since there’s hardly any waste, and they have a square shape.

Due to lower silicon purity and construction, they’re also smaller in energy competence and get an extra gap than monocrystalline panels. In high-temperature environments, they’re also less efficient because of their lower heat tolerance.

Panels with passivated emitter and rear cells (PERC)

The PERC solar panel is an improvement over monocrystalline panels. It boosts efficiency in multiple ways through the application of a passivation layer on its rear surface:

  • A cell absorbs solar radiation more readily if it reflects it back.
  • It keeps electrons from recombining in the system, so it inhibits electron flow.
  • Reflects a lot of light at longer wavelengths. Over 1,180nm light waves don’t absorb by silicon wafers, so they just pass through, which heats the metal back sheet and reduces cell efficiency. By reflecting these higher wavelengths, the passivation layer keeps your back sheet from getting too hot.

The PERC panels allow you to collect more solar energy in a smaller space, so they’re perfect for small spaces.  They’re a bit more expensive to make due to the extra materials, but since they’re more efficient, they’ll probably cost less per watt.

Solar panels with thin films

Panels made of thin films are flexible because they have very fine layers. There’s no frame backing on each panel, so it’s lighter and easier to install. The thin-film panels can be made in different sizes, unlike crystalline silicon panels that come in 60, 72, and 96 cell counts. Their efficiency isn’t as good as silicon panels.

Solar Panel Detailing: How Do They Work?

A solar panel converts sunlight into electricity that powers electrical loads. It’s a renewable source of energy. Each solar panel consists of a number of individual solar cells made up of silicon, phosphorus, and boron. Solar panels generate electricity when they absorb photons. 

When photons strike a solar panel, they can knock electrons out of their orbits and release them into the electric field produced by the cells, which then pull these free electrons into a directional current. The Photovoltaic Effect refers to this whole thing. The roof area of an average house is bigger than enough for enough solar panels to generate enough solar electricity to meet its power needs. Excess electricity is fed into the main power grid, paying off at night.

Power solar panel on blue sky, alternative clean green energy concept

Grid-connected solar arrays generate power during the day that is used at night for the home. Owners of solar generators can earn money if they produce more power than they need. Battery banks, charge controllers, and inverters are essential components in off-grid solar systems. The charge controller sends DC electricity to the batteries. An inverter converts DC current into AC so non-DC appliances can use it. Afterward, the inverter gets power from the battery bank. You can size solar panel arrays to meet any electrical load with the help of an inverter. The AC current also powers telecommunications equipment, oil and gas flow monitoring, RTUs, and SCADAs, as well as homes and commercial buildings.

Benefits of Solar Panel Detailing

Saves you money

With solar panels, you’ll save on energy. Investing in solar panels will save you money over time. If you’re installing your own solar panels, choose a reputable company. Artisan Electric is one of Puget Sound’s largest and most respected solar/electrical contractors. Make sure the company you choose understands that.

Environmentally friendly

Solar panels help the environment, too, since they reduce fossil fuel use. The sun is a renewable resource, so it doesn’t cause global warming as fossil fuels do. Besides that, solar panels don’t emit any emissions. The most widely used renewable energy source is solar, so it’s good for the environment.

You get a higher value for your house

You can increase the value of your home if you plan to sell it. Solar panels make homes more valuable than houses without them, according to studies. Solar panels can increase the resale value of your current home if you’re thinking about moving to a new one.

Easy to install

A solar panel’s other benefit is that it’s easy to install. You don’t have to do any construction yourself with most solar panels because they come with pre-fabricated mounting systems. The only thing they need is a sunny spot on your roof or property. Also, make sure you have a good inverter when you install solar panels. An inverter can manage your solar panel power so you only use it when you need it.

Power outages aren’t a problem

It’s more likely to have power outages during winter storms. The batteries in solar panels can keep them going during these times. When the power goes out, you can still use your solar panels to keep your lights on. You should consider this if you live somewhere where power outages are common.

Cost-effective maintenance

There’s also no maintenance involved with solar panels since you just need to wash them every now and then. You’ll have to check your local laws. You’ll have to clean your solar panels more often if you live somewhere with a lot of trees or high winds. Solar panels don’t require any maintenance if there’s no debris on them.

Colse up solar panels on sunset.

Breaks on taxes

You can also get tax breaks for installing solar panels. Solar panels can get you a 30% tax credit in some states, which is great. Don’t forget to check if you’re eligible for tax breaks if you’re thinking about solar panels.

They’re not just for tax breaks; they’re also for making money. Installing solar panels puts you on the grid. When your home generates more energy than it uses, it can send the extra to the grid and get paid. You’ll make about $200 to $300 a year doing this, depending on your state’s regulations and rules.


With all the benefits of ”Solar Panel Detailing” offers, it is easy to understand why more and more people are opting to install them in their homes and businesses in order to take advantage of all the benefits they provide. Their high cost-effectiveness, eco-friendliness, and many other benefits make them great for residential and commercial properties. Considering these factors before installing solar panels is important if you’re considering the installation.

Related post